Posts Tagged ‘issues’

VMware Stand Alone Converter Issues

May 30, 2013

My woes with the P2V conversions is growing ever since I posted last time! Just an update on couple of things I learned in doing so. First would like to mention an error while specifying source computer to Standalone Converter; it would return the following error.

Unable to complete installation/uninstallation of vCenter Converter agent on ‘X.X.X.X’

As I stated in my last post that I read somehwere in the Standalone Converter help/troublshoot giude to disable files shares in order to access the source hardware information. I disabled my file shares last time for a server which I had to revert then as doing so didn’t solved my problem. But eventually I found out that in Windows Server; ADMIN$ (which points to C:\Windows) cannot be added from Computer Management once deleted. Hence to add that again; do the following steps:

  • Run CMD Prompt as administrator.
  • Run the command > net share ADMIN$ /UNLIMITED

This will enable your ADMIN$ share which will be used by the Standalone Converter to push its agent. Another error I figured out with one of my servers was

The source computer has GPT disk(s). Conversion of live computers with GPT disks is not supported. Conversion of virtual machines with GPT disk is supported only if disk-based cloning is performed.

This was due to the fact that the Standalone Converter is unable to read partitions with GUID tables! Hence it fails the whole process which is just insane on the part of VMware. At least it must give an option to skip that very partition and thus not failing the complete process. To resolve this you will need to disable the partitions. Following these steps:

  • Run CMD Prompt as administrator.
  • Run the command > DISKPART
  • Type > list disk
  • This will give you a list of the partition configured with GPT (indicated by *).01
  • Now goto Server Management > Disk Management and make the specific partition OFFLINE (Do note its capicity).
  • Once the partition is OFFLINE; go to Device Manager > Disk Drives
  • Verify the partition which you just turned OFFLINE by right clicking on the Disk Device > Properties > Volumes > Populate. You can verify it from the Capacity parameter. Click OK.02
  • Now right click on this Disk Device and click DISABLE.

After doing this again run the P2V conversion process; it will work like a charm! Hopefully 🙂 !!!

Advertisements

%d bloggers like this: